A-01A · Shell Covers
Cover Stretch 20
The plainest layer there is. Pull it on, and the belt stops touching your shell directly.
- Fits
- 46–56 cm / 18–22 in
USD 22
A · Shell Covers
Cover Stretch 28
The large version. Cut with more girth allowance, because big cases are the ones that get overpacked.
USD 30
One-time purchase. No subscription.
Free standard shipping over USD 49.
How it is built
The large cut of the one-piece stretch cover, with extra girth allowance for a case packed past its zip line. 240 gsm elasticated polyester, elastic hem top and bottom, wheel and handle cut-outs.
Suits these shells
- Hard shell, polycarbonate
- Flexes under load and springs back. Takes surface scuffing more than cracking.
- Hard shell, ABS
- Stiffer and more brittle than polycarbonate. Corners are the usual failure point.
- Soft side, fabric
- Absorbs impact but scuffs and tears. Zippers and handles take the strain.
Specification
- Fits case height
- 69–76 cm · 27–30 in
- Material
- 240 gsm elasticated polyester, elastic hem, bar-tacked at the cut-outs
- Fits case height
- 69–76 cm / 27–30 in
- Fabric
- 240 gsm elasticated polyester
- Openings
- Four wheel cut-outs, one handle slot
- Care
- Cold hand wash, line dry, do not tumble dry
- SKU
- A-03
Where those figures come from
- Surface abrasion
- Rotary abrasion on the fabric face under a 9 kPa load, assessed at 5,000 cycles against an unabraded control from the same roll, three samples.
- Water resistance
- Fabric face tested under a spray of water for 2 minutes at 23 °C, then examined for through-wetting. Seams and zipper openings are not sealed and are not covered by this test.
Elsewhere in Shell Covers
Open the lineA-01A-02A · Shell Covers
Cover Stretch 24
The mid-size version of the plainest layer. This is the size most checked cases actually are.
- Fits
- 58–66 cm / 23–26 in
USD 26
A-04A · Shell Covers
Cover Clear 24
For people who bought a case they actually like the look of and would rather not hide it.
- Fits
- 58–66 cm / 23–26 in
USD 34